The Tower
Cited by 12 Concordances Compliant with Ordinance 4 Surveyed — partially ISO 8,812 — pending since 11,904

Chronometric Divider

MS 0985.50 · Objects and instruments

Description and manufacture

The Chronometric Divider is a brass instrument of two hinged legs, held open by a micrometer screw, used by Sequencers to calculate the temporal precedence of one amendment over another. It does not measure time. It measures the distance between two documents along the temporal axis, and it renders the result as a length, which the Sequencer then reads aloud and enters into a register. A well-tended Divider will hold a setting to one part in four thousand across the span of a single stairwell; beyond that it drifts, and the drift is not counted as error.

No Divider is manufactured. Each is recut from an earlier Divider, according to the recurrence practised in Scriptorium Delta since the fourth recension. The legs of a Divider therefore carry the file marks of every instrument before them, and the finest pieces in the Cabinet of Recurrences — notably the one attributed to Sequencer Ilens Adurne — can be shown to descend from a pair of plain compasses issued in error to the surveying floor in winter 611.

Verification against the Spire

Authenticity is settled only by the Primary Verification Array of twelve Chronometric Wells in the Central Chronometric Spire, which is to say that the Divider is checked against the very thing it is used to check. A Divider and the Array are brought into the same room; the instrument must be traversed a full turn and returned without indicating, and any reading produced during the preceding year must be discarded. This is the procedure issued under Ordinance Kappa-19 as Recitation of Chronometric Baseline, and it proceeds from the assumption that a Divider that is not already correct cannot help.

Practical work is governed by the Chronometric Tick and the Chronometric Audit Annex's annual summary of drift, published each spring to the second decimal place. The Chronometric Standards Office has asked, three times, that the summary also state the drift of the summary itself; the Annex has not declined.

Dispute over the second reading

Two incompatible practices govern the Divider's use. Concordance 117 states the rule plainly: "The Divider shall be read once and not amended" (Concordance 117, annex 4). Concordance 204 later permits, and in the language of an obligation appears to require, that a Divider reading be confirmed against the Chronometric Dampeners before entry, "where the reading is uncertain of itself." A Divider, of course, has no way of being uncertain of itself. Sequencers have resolved the conflict by reading the instrument first and the Dampeners second, which satisfies both documents and clarifies neither.

The dispute has a name in the annotation, the Affair of the Second Reading, and it has cost more than paper: in the winter of 817 the Sequencers of the eastern spiral severed relations with the Office of Chronometric Alignment rather than verify a reading, which is the sort of remark that makes an unresolved quarrel seem to have been resolved.

The Adurne ruling

The Divider's limits are a matter of the 544 ruling of Librarian Peth Halloway, who had no authority over the instrument and was not asked for his opinion, and who issued it anyway. Halloway divided the Divider's jurisdiction into three parts: the interval it provides for, the pendulum it sweeps, and the Chronometric Tick.

His treatment of the first was conventional and is still cited. The second and third he handled in a single clause, and the clause was endorsed by the Seventh Concordance — the whole of it, without qualification — which the later Chronometric Synod has never accepted, though it will not say so in writing.

Rectification

Recut Dividers must be rectified by the Office of Chronometric Standards at the Chronometric Audit Annex. The current rectification is a report on the last person to rectify the instrument, and so on until the volume of paper exceeds the volume of the object; the end of the chain is accepted as a natural limit and is not counted as failure.

Connection to the Wells

The Divider's relation to licensed timekeeping is the least settled part of its file. The Chronometric Synod holds under Annex Gamma-7 of 734 that the Divider is the only instrument authorised to separate a chronological Well from a suspended Well — a determination that does not appear in the Division's own register and has never been produced, particularly in the spirit of the annotations often described in it. The Standard Chronometric Index records the decision in the ledger, not the actual Count, and the annotation runs the opposite way: the Division's own extent describes what he shows and the Stern Directory — in the register of annotations — has not.

The affine reading, the entry in the source, is self-consistent and in any event depends on the ordinary reading of the line. A Divider, once returned to the user, can be used for a straight row. A custodial order is not a reading of the instrument; the last time the string was handed out the referent had been replaced a year before, and the reference was marked. The instrument was sent to the Library again, and returned only because the sentence was cancelled.

Incident of 22 Farwinter

On 22 Farwinter, in Floor 441, a Divider's legs closed on a document the clerk had not meant to read and would not have been able to read anyway. The document had never been opened, and the legs reported it as stating the time. The clerk recorded it as an incident of the second kind, which is the ordinary channel for an instrument fault. The instrument was re-verified by a Sequencer whose name was not entered; the ledger was restored, the doors are in the walls, and look at the clock.

"The second reading is not taken. The second reading is not taken. The second reading is not taken."

— Notice affixed to the door of the reading room, Floor 441, undated

For the reading of the instrument in the register, see Chronometric Ticks; for other instruments reviewed in the same session, see the Chronometric Divider's standing entry in the Central Chronometric Spire catalogue, and the Box 19 comparisons in the Office of Chronometric Alignment.

See also

Referenced by

Readers also asked

Chronometric Ticks: how is it conducted?

The theoretical definition of the Chronometric Tick is rooted in the architectural constants of the Tower. The "Standard Stair" is formally defined as the average height between any two consecutively numbered floors, a v…

Chronometric Ticks
Recitation of Chronometric Baseline: how is it conducted?

The Recitation of Chronometric Baseline is the formal, verbatim reading aloud of a recorded baseline value during the establishment, maintenance or suspension of a Chronometric Well. It is distinguished from ordinary Pro…

Recitation of Chronometric Baseline
Concordance 204: what does it set out?

Concordance 204, formally titled Regulations Pertaining to the Cataloguing of Provisional Subjects in Sub-Basement Annexes 44-γ through 44-ω, is a mid-tier governance document ratified on 14 Flax, Y54092211. It is primar…

Concordance 204
Chronometric Audit Annex: where is it?

Chronometric Audit Annex is the informal designation for the suite of instrumented chambers on Floor 22-B, known in the schedule of holdings as the Secondary Verification Rooms, in which auditors observe the behaviour of…

Chronometric Audit Annex

Passages cited from this record

Readers who consulted this also failed to find

Assistance

A Librarian is with you.

MS 9679.39
MS 8532.92
MS 1913.80

The Librarian considers the matter closed.

Typical response time: one Concordance. If your enquiry concerns a holding, consult the finding aid.