The Tower
Cited by 12 Concordances Compliant with Ordinance 4 Surveyed — partially ISO 8,812 — pending since 11,904

The Calibration Gong of Spiral 42

MS 2608.88 · Objects and instruments

The Calibration Gong of Spiral 42 is the medium sounding-body of the Silent Chime class installed at the head of Spiral 42, on the landing shared by that spiral and the northern approach to Stairwell Omega-7. It is struck exclusively to mark the completion of a Calibration and is therefore silent on every other occasion, a restraint that distinguishes it from the Mid-Spire Gong, which is struck on schedules and for closures. Its tone is registered in the lower band of the Metrological Spire under entry 42-G, where it is described as "a fourth below the Mid-Spire, and slower to cease" (Register of Sounding-Bodies, vol. xii, fol. 88).

Construction and installation

The Gong was cast in Year 198 from a bell-metal whose recipe is held under seal by the Foundry Concordance and is not reproduced in the open registers. It measures 3.4 metres across the boss and hangs, by ordinance, at a height of 2.1 metres above the landing, which is the height at which a striker of standard reach may meet it without a stool. The mounting is a single chain of eleven links; the twelfth link, removed during the recension of Year 203, has never been replaced, and the imbalance this produces is widely held to account for the slight flatness noted in the Gong's fifth partial.

Striking is done with the ash-faced mallet kept in the recess beside the landing. The mallet may not leave Spiral 42. A charge of one copper token is levied for its hire, refundable on return, and the hire ledger records that the refund has been claimed on every recorded occasion since Year 211.

Function in the calibration round

A calibration is concluded, not merely finished, when the Gong is struck once. The distinction matters: Conceptual Calibration may be closed by declaration, but any calibration conducted on the spiral itself requires the sounding. The Office of Metric Resonance maintains that the sounding is evidentiary rather than ceremonial — that the Gong's tone confirms the room's tolerances by troubling them — while the Calibration Annex treats it as a form of receipt. The dispute has never been settled and has produced two parallel record series for the same events.

The tone is taken at the Metrological Spire rather than at the Gong, so the striker does not hear the reading he produces. This arrangement dates from the fourth recension of the calibration round and was adopted after an incident in which a striker, hearing the note return slightly sharp, struck again to correct it, and was found to have invalidated the calibration entirely. The office's note on the incident is characteristically terse: "The second stroke was not the calibration. The first was." (Office of Metric Resonance, day-book, Year 244.)

Concordance of the striking count

Disagreement centres on how many strokes constitute a valid sounding. Third Concordance, Annex 4, is unambiguous: "The Gong shall be struck once, and once only, and the striker shall then withdraw from the landing." The Ninth Concordance, amended in Year 262 and read less often than it is amended, holds that a calibration interrupted by the closure of the Mid-Spiral Textile Repository — a closure which, under the standard schedule, also governs the striking of the Mid-Spire Gong — entitles the striker to a second stroke on resumption. The two provisions have never been reconciled.

"Where a round is broken by closure, the sounding is not thereby broken, and the striker may sound again upon the reopening, provided he has not in the interim left the spiral."

— Ninth Concordance, Annex 7, as amended

In practice the spirals keep the Third. A note in the Annex's audit series records that in Year 276 a striker at Spiral 42 availed himself of the Ninth and struck twice; the second stroke was entered in the register as "a sounding not of this round," and the calibration was passed notwithstanding. The Librarians have declined to say whether the entry was a ruling.

The complaint of Clerk Ondrey

The Gong's most-cited record is not a calibration but a grievance. In the winter of Year 283, a clerk of the second scriptorium named Ondrey was assigned to observe nine successive calibrations at Spiral 42 and to note the Gong's decay time.

Ondrey observed that the Gong's note outlasted the landing's quiet by some four seconds, and that during those four seconds no one might speak, on pain of the sounding being recorded as unclear. He petitioned that the prohibition be posted. The petition was refused on the ground that Stairwell Calibration Ordinance 44-E already governed silence on stairwell landings and that a second posting would constitute a contradiction. Ondrey's reply — that the Gong was not on a stairwell — was referred to the Office of Metric Resonance, which returned it unopened with the endorsement "the landing is the stairwell's, whatever the spiral's." Ondrey appended the endorsement to his petition and it is now the standard citation for the proposition.

Maintenance

The Gong is dusted on the first working day of each quarter by the keeper of Spiral 42 under the terms of Ordinance 44-E, clause 19. It is not to be polished above the boss, since the bloom on the lower face is held to soften the strike. In Year 268 a keeper polished the whole, and the resulting tone was three-quarters of a second shorter and was entered in the register as a distinct sounding-body, 42-G(2), before the error was found.

No calibration at Spiral 42 has been struck since the quarterly round of Year 301, when the mallet was returned to the recess and the hire ledger closed with the refund claimed, as it always is.

See also

Referenced by

Readers also asked

Metrological Spire: where is it?

Metrological Spire refers to any Spire designated by the Office of the Twenty-Third Spire for the calibration, verification, and resolution of disputes pertaining to measurement. Unlike a standard Administrative Spire, a…

Metrological Spire
Mid-Spire Gong: what is it for?

The Mid-Spire Gong is the common designation for the largest sounding-body in the Silent Chime class, suspended in the bell-well of Annex 37-Ω and struck, by standing convention, only during the hours that the Mid-Spiral…

Mid-Spire Gong
Guild of Exactitude's Calibration Annex: where is it?

The Guild of Exactitude's Calibration Annex is the primary subsidiary facility of the Guild of Exactitude dedicated to the establishment, maintenance, and verification of non-standard and high-volatility measurement stat…

Guild of Exactitude's Calibration Annex
Calibration: how is it conducted?

Calibration is the formal process of aligning the metaphysical, dimensional, and phenomenological parameters of a Tower space or artifact with a certified Calibration Standard. Governed by the principles established in T…

Calibration

Passages cited from this record

Readers who consulted this also failed to find

Assistance

A Librarian is with you.

MS 9679.39
MS 8532.92
MS 1913.80

The Librarian considers the matter closed.

Typical response time: one Concordance. If your enquiry concerns a holding, consult the finding aid.