The Principle of Metrological Fidelity
MS 7679.65 · Practices and doctrines
The Principle of Metrological Fidelity is the governing practice of the Directorate of Dimensional Fidelity and, by extension, of every office compelled to submit measurements in its support. It holds that a recorded measurement is faithful only insofar as it can be reproduced, by any competent hand, from the instruments and the residue left standing at the moment of its taking. The Principle is not concerned with whether the thing measured exists. It is concerned, strictly, with whether the number is honest.
The Principle was set down in its operative form by Concordance 31.2, Clause 6, which reads: "A quantity not reproducible is not a quantity but an opinion, and opinions are held elsewhere." Its authority is administrative rather than metaphysical, and the Directorate has always insisted on that distinction, most sharply in its long quarrel with the Office of Vertical Fidelity over the status of The Principle of Latent Fidelity.
Application
The Principle requires that all spatial, temporal, and harmonic measurements in a description adhere to the Standard Metrological Protocol Delta. In practice this obliges the measuring clerk to leave in place, at the close of any survey, the instrument, the placement marks, and a written trace of the hand that made the reading. A measurement whose instrument has been put away is treated, for the purposes of the Principle, as having never been made.
The rule has produced minor hardship on the upper floors, where stairwell widths are narrow and instruments must often be withdrawn to let a party pass. The Directorate's answer, issued as Circular 9, is that parties should pass single file and that instruments left standing overnight are not to be dusted.
The Principle is administered through Dependency Tracing, a procedure by which any claim of fidelity may be traced back through every instrument, recension, and office that contributed to it. The Bureau of Metrological Harmony governs the process and issues fresh weighting tables each year, which are frequently revised before they are read.
Relation to Latent and Morphological Fidelity
The Directorate has consistently subordinated The Principle of Latent Fidelity to the Principle of Metrological Fidelity, on the ground that a concealed correspondence between a description and the unobserved substratum of the Tower cannot be reproduced by a second hand and is therefore, in the technical sense, an opinion. The Office of Vertical Fidelity, which first set out the Latent Principle in its recensions, has never accepted this, and the dispute is now in its fourth century of correspondence.
A parallel and older dispute concerns Morphological Fidelity. Concordance 88.1 upholds the distinction between Dimensional and Morphological Fidelity, and the Directorate treats the two as wholly separate registers of accuracy. Concordance 88.4 quietly unsettles this position and amends a Contested Imperative, though the amending clause has been variously read as a correction, a restatement, and — by the Guild of Literalists — a blank.
The Ellsworth Recension
The most cited commentary on the Principle is the Ellsworth Recension of the Metrological Protocols, compiled on Floor 212 during the winter of the third registry revision. Ellsworth's contribution was to insist that the residue left by an instrument is itself a measurement, and therefore subject to the Principle, and therefore must be left standing where the next clerk can see it. The consequence — that a survey never concludes, only accumulates — was received poorly by the Bureau of Metrological Reconciliation and has not been fully resolved.
"The reading is not the rod. The reading is the rod, the hand, the hour, and the dust. Strike the dust and you have struck the reading."
— Ellsworth Recension, Section 4, marginal note
Ellsworth himself was reprimanded in the same winter for removing an instrument from a stairwell so that a party might pass. The reprimand is preserved in full in the Registry of Metrological Dependency.
Contested readings
Two readings of the Principle presently divide the Metrological offices. The first, the Strictconstructionist Faction, holds that the Principle permits no measurement to be revised after its residue has settled, citing On the Inalterable Alpha and the doctrine of Originary Fidelity. The second, advanced largely within Division III: Metrological Anomalies, holds that the Principle is satisfied so long as the procedure was correctly executed, a position close to the Principle of Procedural Purity and disowned by the Directorate as a confusion of the register.
The Directorate has declined to adjudicate, noting in its Third Memorandum on Reproducibility that both readings are traceable to the same clause and that Dependency Tracing will settle the matter once the Bureau's weighting tables stabilise.
Notes
Measurements bearing on the Metrological Spire and the Central Metrological Spire are exempt from the residue requirement, on the ground that the Spires are their own residue. Cords, plumb-lines, and unattended rules found on the Spire landings are to be left where they lie and reported to the Metrological Vault by the next party through.
See also
-
MS 3295.06
Threnodic Caliper
The Threnodic Caliper is a Class-III metrological instrument certified for the quantification and dimensional mapping of sympathet…
-
MS 1796.94
Standard Metrological Protocols
Standard Metrological Protocols (SMP) refers to the governing codex of measurement practices, instrument certification, and disput…
-
MS 4816.28
Manual of Metrological Praxis
The Manual of Metrological Praxis is the standing instructional text governing the measurement of positions, intervals, and displa…
-
MS 9211.39
The Directorate of Metric Reconciliation
The Directorate of Metric Reconciliation is a standing body of the Tower charged with reconciling measurements taken on separate f…
-
MS 0017.79
Bureau of Dimensional Reconciliation
The Bureau of Dimensional Reconciliation (BDR) is the regulatory body within the Sub-Bureau of Temporal Reconciliation responsible…
-
MS 9867.62
Office of Metrological Assurance
Office of Metrological Assurance (OMA) is an appellate and custodial body responsible for the adjudication of metrological conflic…
Referenced by
- MS 8663.07 The Protocol of Resonant Description
Readers also asked
Central Metrological Spire: who are they?
The Central Metrological Spire is the principal metrological complex of the Tower's core administrative sectors and the body charged with the maintenance, comparison, and periodic re-declaration of the standards by which…
Central Metrological SpireMetrological Vault: where is it?
Metrological Vaults constitute the central depository and archival complex for the foundational standards of all canonical measurement, operating under the ultimate custodial and appellate authority of the Office of Metr…
Metrological VaultStrictconstructionist Faction: who are they?
The Strictconstructionist Faction, active from approximately Floor 12–α (Gamma Spiral) through to its formal dissolution under the Thirty-Seventh Concordance's Clause 81.2, held that the first and only valid document of …
Strictconstructionist FactionConcordance 88.1: what does it set out?
Concordance 88.1 is a single-clause instrument of the Librarians, appended to Concordance 88 on the eleventh day of the ninth spiral, and is chiefly remarkable for having been amended more times than any other subordinat…
Concordance 88.1Passages cited from this record
-
The reading is not the rod. The reading is the rod, the hand, the hour, and the dust. Strike the dust and you have struck the reading.
Ellsworth Recension, Section 4, marginal note
Readers who consulted this also failed to find
- MS 6130.75 Circular 9 (Maintenance)
- MS 8770.72 Originary Fidelity
- MS 3389.84 Concordance 88.4
- MS 6987.33 Third Memorandum on Reproducibility
Because you consulted