The Tower
Cited by 12 Concordances Compliant with Ordinance 4 Surveyed — partially ISO 8,812 — pending since 11,904

Standard Measurement Protocol Delta

MS 2425.73 · Practices and doctrines

Overview

Standard Measurement Protocol Delta is the collective designation for the family of metrological instruments, schedules and verification chains derived from the Standard Measurement Protocol (SMP-Δ) and administered under the standing authority of the Delta Council. Where the parent Protocol sets out the general obligations of measurement within the Tower, the Delta instruments specify how those obligations are discharged in practice: which spans are taken first, by whom, on what schedule, and what is done when two measurements of the same Gap disagree.

The Delta family is not a single document. It comprises a document layer (Descent Protocol Delta-7-22, its companion recension, Protocol Delta/7, Protocol 308-Delta and Guild Standard 114 Delta 7b, Annex C), a practice layer (Descent Protocol Delta 7 22 Practice and Delta Measurement), and an adjudicative layer vested in the Council. Clerks of the Gap are fond of the observation, recorded in the margin of a Fourth Concordance working copy, that "the Delta is one protocol wearing several coats, and the coats do not always agree about the weather."

Relationship to the Standard Measurement Protocol

The Delta instruments take their authority from SMP-Δ and may not exceed it. In practice the boundary is porous. Annex 9 through Annex 14 of SMP-Δ are held to be the distilled source of the working method described at Gap Measurement Standard Measurement Protocol (SMP-Δ), and the Delta schedules are in most respects an elaboration of those annexes with the arithmetic made explicit. Where SMP-Δ speaks of "redundant measurement chains and periodic verification," the Delta specifies the number of chains (three), the interval of verification (eleven floors, or one Standard Tower Unit of vertical traverse, whichever is reached first), and the form of the ledger in which the result is to be entered.

The Protocol's triplicate verification requirement is the load-bearing element of the whole Delta apparatus. The primary measurement is the first leg; the second and third legs exist to detect delta — the divergence between successive readings of an unchanged span — and to assign it to a cause. The Delta instruments recognise four causes: observer-induced drift, stairwell settlement, aperture migration, and "unassigned." The fourth category is the largest and is the subject of periodic complaint from the Clerks of the Gap.

Vole's Axiom and the resonant-geometry question

The Delta family acquired its present shape during the dispute that followed the formulation of Vole's Axiom by Senior Metrologist Ardis Vole. Vole's amendment to SMP-Δ extended the Protocol's applicability to resonant geometries, and the Delta schedules were revised to carry a resonant-geometry column in every measurement ledger. Whether the column should be completed at the time of measurement or retrospectively was debated for the better part of a decade.

The Delta Council ruled in favour of contemporaneous entry, on the ground that retrospective completion "invites the measurement to be corrected by the memory of the measurer, which is not a calibrated instrument" (Delta Council Ruling 44, cited in Protocol Delta). The Clerks of the Gap have never accepted the ruling, and a substantial number of older ledgers remain in circulation with the resonant column blank.

Disagreement in the record

The Delta instruments contradict one another on the question of precedence. Descent Protocol Delta-7-22 states at clause 3 that where a Delta schedule and a Guild Standard conflict, the Delta schedule prevails. Guild Standard 114 Delta 7b, Annex C states, with equal confidence, that the Guild Standard prevails over "any schedule of recent devise." Both carry seals of the same vintage. The Delta Council has declined to resolve the conflict directly, preferring instead to rule case by case, with the result that the answer depends on which office is asked and on the day.

A second and more bitter disagreement concerns the status of Protocol 308-Delta, which some readings treat as a Delta instrument and others as an unrelated protocol that happens to share the letter. The Seventh Concordance lists it among the Delta holdings; the Ninth Concordance, Annex 2, lists it among the "protocols of independent standing." Clerks required to file a copy have been known to file two.

"Where two instruments of equal seal disagree, the measurer shall record both readings and proceed. The Tower does not require that the world be consistent, only that it be written down."

— Fourth Concordance, Annex 11

Administration and practical notes

The Delta Council meets on the Eleven-Hundred Floor and maintains the master register of Delta instruments. Copies issued for field use must bear a current verification stamp; unstamped copies are treated as drafts and are not to be cited in a spirelocation survey, which requires a current copy of SMP-Δ and, by extension, the Delta schedules annexed to it. The survey office on the Fourteenth Landing keeps a standing supply of stamped copies and will not issue them to clerks who have mislaid their previous issue, a rule introduced after the winter of the Long Inventory and never rescinded.

The instruments in current circulation are:

Copies are to be returned to the survey office at the close of an expedition. Copies carried below the Forty-Second Floor are to be returned regardless of the expedition's outcome.

See also

Referenced by

Readers also asked

Seventh Concordance: what does it set out?

The Seventh Concordance is the primary administrative codex governing the measurement, classification, and cataloguing of phenomena defined by their absence, incompletion, or intrinsic paradox. Ratified in Year 47 of the…

Seventh Concordance
Delta Measurement: how is it conducted?

Delta Measurement (formally Measurement Protocol for Quantifiable Anomalies Under Annex Δ) is the standardized biannual assessment of structural and conceptual integrity within designated Ambulatory Annexes. Codified und…

Delta Measurement
Protocol 308-Delta: what does it set out?

Protocol 308-Delta is an auxiliary volume appended to the Primary Operational Protocol Delta in accordance with the suffix standardization rules established by Protocol Delta itself. It details the specific archival para…

Protocol 308-Delta
Standard Measurement Protocol (SMP-Δ): what does it set out?

The Standard Measurement Protocol (SMP-Δ) is the foundational and binding codex of metrological procedure within the Tower, issued under the auspices of the Librarians’ Department of Ambiguous Metrics. It prescribes the …

Standard Measurement Protocol (SMP-Δ)

Passages cited from this record

Readers who consulted this also failed to find

Assistance

A Librarian is with you.

MS 9679.39
MS 8532.92
MS 1913.80

The Librarian considers the matter closed.

Typical response time: one Concordance. If your enquiry concerns a holding, consult the finding aid.