Clause 9, Article 3
MS 5702.48 · Documents and ordinances
Clause 9, Article 3 is the instrument by which the Third Concordance fixes the tolerances of instrumental calibration throughout the Tower. It is not to be confused with Article 3, with Article 3, or with the Article 3 of any of the other recensions in which the number recurs; the present clause is the ninth clause of the Third Concordance's third article, and is cited in practice as III.3.9. Its subject is narrow — how far an instrument may drift before its readings are struck from the record — and its consequences are not.
Text and function
Clause 9 establishes that no instrument may be certified for ledger use until it has been shown to hold within a stated tolerance across three consecutive readings taken at intervals of no less than one floor. The clause does not itself fix the tolerance; it delegates that figure to the office certifying the instrument, subject to the supervision of the Bureau of Practical Cartography under Article III of the Latent Topography Clause. It was this delegation, rather than the clause's substantive rule, that produced the difficulties described below.
The clause further provides that an instrument which fails certification is not destroyed but "retained in a condition of witnessed error," a phrase whose interpretation has occupied the Sixteenth Concordance at length. The Sixteenth Concordance, Clause 9, Article 3, treats calibration as a species of testimony and holds that a failing instrument's readings remain admissible as evidence of what the instrument believed, though not of the floor.
The Sub-Committee on Tolerances
In the winter following the 309th Recension, the Bureau convened a Sub-Committee on Tolerances to reconcile the clause with the voiding of Clause 19 of Article V by Article IV: The Reconciliation of Authorities. The Sub-Committee sat for eleven sessions on Floor 44 and produced a single recommendation: that the tolerance be expressed as a fraction of the distance between consecutive landings, "the stair being the only unit of length the Tower cannot mislay" (Sub-Committee on Tolerances, Minute of the Ninth Session).
The recommendation was adopted informally and never formally. A clerk of the Bureau, Perrin Voss, recorded in the margin of the fair copy that the fraction had been written in pencil and that "pencil does not survive the copying-room." Voss's grievance, set out in a memorial of some length, was that he had been asked to certify instruments to a tolerance that existed only in the hand of a man since reassigned to Floor 212. The memorial is preserved; the pencil is not.
Disagreement with Article I
Clause 9 presumes that an instrument may be calibrated against something stable. Article I: Definitions, the foundational clause of the Third Concordance and formally designated III.1, holds on the contrary that all measurement is absolute and requires no reference object whatever. The contradiction is not resolved by Article III, which introduced the doctrine of conditional extancy and thereby contradicted Article I's absolutism a second time, nor by Article IV: The Reconciliation of Authorities, which addresses contradictions among governing texts but not within a single article of one of them.
The twelfth article of the Third Concordance offers a partial accommodation, permitting calibration "against a standard of known behaviour" without specifying whether a stair counts. The Bureau maintains that it does. The Definitions of Litigation maintains that it does not. The two offices have not spoken since the Recension, and correspondence between them is routed through the Office of Establishment, which returns it unopened.
Practical notes
Instruments certified under Clause 9 are stamped on the reverse with the clause number and the certifying floor. Stamps are applied by hand and must be legible from a distance of one arm's length; instruments stamped illegibly are returned to the instrument, not to the clerk. Visitors carrying their own instruments are asked to leave them at the landing and collect them on the way down.
Clause 9 has been amended twice, both times in respects that the amendments themselves describe as "clarifying." The second amendment, dated to the 311th Recension, replaced the word "consecutive" with "consecutive," a change recorded in the recension's schedule as substantive and defended in the margin as necessary.
Status
Clause 9, Article 3 remains in force. Its tolerances are observed, its stamps are legible, and the fraction by which the Bureau measures them is still, in the strict sense, unwritten. Inquiries as to the pencil should be directed to Floor 212.
See also
-
MS 7068.85
Tertiary Instrumental Office
The Tertiary Instrumental Office is the administrative body charged with custody, calibration, and complaint adjudication for equi…
-
MS 5702.16
Article IV: Calibration Standards
Article IV: Calibration Standards is the fourth article of the Manual of Transcription Standards and the operative provision by wh…
-
MS 2882.42
Instrumental
An Instrumental is a formally recognized entity within the Tower whose existence, properties, or functions are certified as essent…
-
MS 0232.80
Western Atmospheric Spiral Calibration
Western Atmospheric Spiral Calibration is the standing procedure by which the tolerances, drifts, and recorded appearances of the …
-
MS 6522.25
Instrumental Transience
Instrumental Transience is the certified condition of an Instrumental whose measured properties remain valid but no longer obtain …
-
MS 4830.49
Calibration Atrium on Floor 711
The Calibration Atrium on Floor 711 is a Primary Atrium dedicated to the performance of the Rite of Local Calibration and the main…
Referenced by
- MS 8768.61 Clause 9 of the Sixteenth Concordance
Readers also asked
Sixteenth Concordance: what does it set out?
The Sixteenth Concordance (officially designated Constitutional & Administrative Statutes, Sixth Iteration, with Annexes) is a foundational governance document within The Tower, ratified on the 14th of Fructidor, Year 73…
Sixteenth ConcordanceArticle 3 (The Definition of Occupiable Nullity): what does it set out?
Article 3 is the third Article of the First Concordance, promulgated on floor 6-B and among the most frequently amended provisions in the Tower's inventory of definitions. It establishes the conditions under which a volu…
Article 3 (The Definition of Occupiable Nullity)Bureau of Practical Cartography: who are they?
Bureau of Practical Cartography is the Librarian-chartered office responsible for the production, storage, and periodic re-measurement of maps that are demonstrably usable on floors they do not depict. Established under …
Bureau of Practical CartographyArticle 3: what does it set out?
Article 3 is the third-numbered clause of the Concordance of Unclaimed Interior and the earliest article of that instrument to proceed by enumeration rather than declaration. Where Article I: Definitions states the condi…
Article 3Because you consulted