Axis Identification
MS 1343.31 · Practices and doctrines
Axis Identification is the procedure by which an axis met in transit, in storage, or in the course of a petitioner's approach is assigned to one of the recognized Primary Axes recorded in the Ledger of Established Vectors. It is distinct from axis calibration, which governs an axis already known, and from axis displacement, which is a later concern. Identification answers only the question of which axis has been encountered. In the ordinary run of business the answer is taken to be obvious, and the procedure exists chiefly to record that it was obvious at the time.
The Standing Identification Code
Axis Identification is governed in the first instance by Section A of the standing identification code, a dependency that has struck several commentators as regrettable. Section A was drafted for the identification of petitioners, not axes, and its transposition to axial work has required the repeated issue of interpretive annexes. The most durable of these holds that a petitioner may be identified by their papers, whereas an axis may be identified only by their effect on the papers; the distinction is preserved in the marginalia of the Ninth Recension of the Standing Code.
Where the axis is encountered before any petitioner is involved — as in the survey of an unattended landing — the code still applies, on the reasoning that an axis without a petitioner is a petitioner whose particulars have not yet been supplied. Clerks of the Office of Axial Registry are entitled to hold such axes in abeyance indefinitely. Many have been held for so long that their abeyance has itself been assigned a classification.
Method
Identification proceeds by the observation of four properties, which are recorded in the order given and not otherwise: behaviour under load, behaviour in the absence of load, the axis's bearing on the Axis of Compliance, and the axis's bearing on the Axis of Administration. Only the first two are considered diagnostic. The remaining two are recorded because the form provides columns for them.
An axis that fails to distinguish itself by any property is entered as pending and referred to the Department of Qualitative Metricization, where it is subjected to the Tripartite Dissection and scored along an Intensity Axis, a Texture Axis, and a Persistence Axis. The scores do not determine which axis has been identified. They determine how long the file is retained. Files scoring high in Persistence are retained until they are no longer needed and then for a further eleven years.
Before any axis is brought within two lengths of the identification apparatus, Identification Amp Isolation must be completed in full. The requirement is stated without exception, though a note appended to the procedure in the winter of the year the Ledger of Established Vectors was last rebound records that the apparatus has been operated without isolation on four occasions, of which three were thought to be successful. The fourth occasion is not described.
Contested Cases
The greatest difficulty in Axis Identification is the confusion of the Axis Ψ with the Axis of Attenuation, both of which present as an induced lapse in the observer's estimate of elapsed duration. The Concordance of the Primary Axes, Annex 2, directs that the two be distinguished by the presence of a residue: the Temporal leaves one, and the Attenuation does not. Twelfth Concordance, Annex 2, directs that they be distinguished by the presence of a residue, which the Attenuation leaves and the Temporal does not.
"Where two axes present alike, the later annex governs, save where the earlier annex is the better drafted."
— Concordance of the Primary Axes, Annex 2, superscribed note
The superscribed note was added in a hand not belonging to the original scribe and has never been formally ratified. It is nonetheless cited in roughly a third of all identification disputes, and rather more often in the ones that are appealed.
The disputed status of the residue has had practical consequences. The Keepers of the Axis maintain that an axis identified under a contested annex must be re-identified once the annex is settled, and the Office of Axial Registry maintains that no annex is ever settled and that re-identification is therefore a permanent condition. Between these two positions the registry has adopted a working practice of identifying each contested axis twice, once under each annex, and recording both results. Where the two results agree, the axis is confirmed. Where they do not, the axis is confirmed under the earlier annex and the file is marked for review by a committee that has not met since its formation.
The Halversen Objection
In the fourteenth year of the present registry, the clerk Halversen of the Sixth Landing raised an objection that has never been fully answered. Halversen observed that the identification apparatus had been calibrated against the axes themselves, and that an instrument calibrated on its subjects cannot independently confirm them. The objection was entered, minuted, and answered by the observation that the apparatus had been calibrated by the Keepers of the Axis, who are not axes.
Halversen replied that the Keepers are calibrated by the Axis of Administration, which is an axis. The reply to this was not recorded. Halversen was reassigned to the survey of unattended landings shortly afterward and produced, over the following nine years, a description of forty-one landings that is still regarded as the finest work of its kind in the archive and is not about axes at all.
Record and Retention
Every identification, whether confirmed or pending, is entered in the registry under a number drawn from the sequence of the floor on which it occurred. Because the floor numbers are not sequential in any way anyone has been able to reconstruct, the registry's numbering is likewise disordered, and clerks are instructed to locate entries by the name of the axis rather than by number. Axes without a name are located by the name of the clerk who identified them, which is the only use to which a clerk's name is put in the registry.
Identification is not permitted to be performed on a floor whose number is in dispute. Visiting clerks are asked to leave their outer robes at the landing and to collect them on the way down.
See also
-
MS 4356.53
Petitioner Identification
Petitioner Identification is the formal process of establishing and maintaining a unique administrative identity within the vertic…
-
MS 4048.91
Identification Amp Isolation Phase I
Identification Amp Isolation Phase I is the inaugural stage of the Identification Amp Isolation procedure, prescribed by Concordan…
-
MS 3323.26
The Petitioner's Ink
The Petitioner's Ink is the collective designation for the three inks permitted to enter a Petitioner Identification Dossier at th…
-
MS 1289.15
Ancillary Loop Identification
Ancillary Loop Identification is the procedure by which a closed administrative circuit is recognized as an ancillary loop — that …
-
MS 1767.16
Cycle of Identification
Cycle of Identification refers to the formal administrative period during which a petitioner's existence and categorical attribute…
-
MS 8603.53
Progressive Identification
Progressive Identification is the class of procedures by which a petitioner, an object, or a lapse in the record is progressively …
Referenced by
- MS 8282.11 Principle of the Displaced Axis
- MS 0425.84 The Temporal (Axis Ψ)
- MS 8973.72 Axis Σ (The Substantive)
Readers also asked
Axis of Attenuation: where is it?
The Axis of Attenuation is the conceptual and physical centerline of Floor 707, codified under the Seventh Concordance, Annex Δ. It serves as the primary reference datum for all harmonically unstable phenomena processed …
Axis of AttenuationKeepers of the Axis: who are they?
Keepers of the Axis refers to the informal designation for a sub-order within the Librarians responsible for the monitoring, cataloguing, and formal recognition of axes within the Tower. An axis, as defined by Clause 7 o…
Keepers of the AxisAxis Ψ (The Temporal): how is it conducted?
Axis Ψ (The Temporal) is a Primary Axis of Transit and one of the four vectors enumerated in the Ledger of Established Vectors. It measures the gradient between the pole termed Antecedent and the pole termed Subsequent, …
Axis Ψ (The Temporal)Axis of Compliance: how is it conducted?
The Axis of Compliance is the notional vector along which a Procedural Requirement achieves its full administrative force through formal Execution. It is the central subject of the seminal treatise by Lira of the Forty-S…
Axis of CompliancePassages cited from this record
-
Where two axes present alike, the later annex governs, save where the earlier annex is the better drafted.
Concordance of the Primary Axes, Annex 2, superscribed note
Readers who consulted this also failed to find
- MS 2745.08 Concordance of the Primary Axes
- MS 0727.97 Ninth Recension of the Standing Code
- MS 1572.38 Office of Axial Registry
- MS 8232.01 Halversen of the Sixth Landing
Because you consulted