The Tower
Cited by 12 Concordances Compliant with Ordinance 4 Surveyed — partially ISO 8,812 — pending since 11,904

Temporal Precision

MS 4336.68 · Practices and doctrines

Definition and Measurement

Temporal Precision is a measurable quality of an ordinance, declaration, or catalogue entry pertaining to the degree of precision with which it defines its temporal parameters. The quality is not synonymous with accuracy; a document may specify a moment with great precision and describe it incorrectly, a distinction the Vestibule of Measure has upheld in no fewer than nine recensions since the practice was first formalized. Precision concerns only the fineness of the specification itself.

The quantity is reported by the Standard Declarative Gauge, which expresses it as a ratio on the Lambda Coefficient. A Lambda of 1.000 denotes a specification fixed to the second; a Lambda of 0.400 denotes one fixed to the month. Values below 0.100 are recorded but not discussed.

The Polian Corollary and Early Practice

The doctrine acquired its theoretical footing during the 214th Consolidation, when Theoretician Pol, then serving as a cited Registrar of Precision, published On the Inevitability of Precision. The work's seminal addendum first articulated the First Polian Corollary, which holds that any temporal parameter, once stated, tends toward further specification by its own internal logic and the intervention of clerks.

"A declaration of the year invites the month; the month, the day; the day, the hour until the hour is reached, and then the subdivisions thereof, which are without natural terminus."

— On the Inevitability of Precision, Addendum, §2

Pol's evidence was largely drawn from the Third Concordance, whose temporal annexes were amended eleven times in a single winter on the question of when a particular levy fell due. The levy was never collected. The annexes remain in force.

The Doctrine of Cataloguing Precision

The Registrar of Precision is the primary authorial authority on the doctrine of Cataloguing Precision, which governs how finely the Tower's own records may specify their subjects. The doctrine distinguishes necessary precision, which a record requires to function, from redundant precision, which is sequestered in the Vault of Redundant Precision under the Registrar's administration. The distinction is often contested and is the subject of an ongoing grievance filed by Senior Clerk Ovett Marrant, who argues that the line has been drawn incorrectly since the 300-level recension and who has, since the winter of the ninth Consolidation, recorded every disputed transfer in a private ledger of some twelve thousand entries.

Where redundant precision is found in an ordinance rather than an artifact, the Registrar may require the excess to be excised and the excised material filed. The filing of excised precision is itself specified to the second, a fact the Master Calibrators have noted without comment.

The Versus a Moratorium Problem

A serious interpretive difficulty arises during a Versus a Moratorium state, in which disputes are suspended pending re-examination. The Registrar of Precision's role is complicated during such a state when adjudicating precision-adjacent activities, since the Moratorium's own commencement is typically stated with insufficient Temporal Precision to determine whether it has yet begun. In the celebrated case of the eleventh winter, the Moratorium on the floor of Temporal Cartography was held to have commenced at an hour that could not be reconstructed from the record, and was therefore treated as having commenced never.

Practitioners working with Temporal Cartography are advised to fix commencement to the hour and to engrave it, rather than to state it. A pencil entry will not survive a Moratorium hearing.

Disagreement Between the Concordances

Scholarship divides on the floor at which Temporal Precision should be measured rather than merely stated. The Third Concordance holds that precision attaches at the moment of drafting and is thereafter fixed. The Ninth Concordance, annex 2, holds the contrary view, that precision may be assigned retroactively by any later clerk of sufficient rank. A third position, recorded in the Concordance of the Vestibule and defended chiefly by the Master Calibrators, maintains that precision is a property of the instrument rather than the document, and that a precisely drafted declaration measured against a coarse gauge is coarse in fact.

The disagreement has practical consequence. Instruments returned to the Vestibule of Measure from The Pedantic Gradient, Sub-basement Theta are routinely found to have drifted by as much as 0.02 Lambda over a season of ordinary service, and the question of whether the drift affected the precision of the records made with them has never been settled in writing. A standing instruction requires that such records be re-measured and the matter referred.

Relation to Adjacent Measures

Temporal Precision is frequently confused with the Coincidence Coefficient, which is defined as a ratio of attributable content rather than of temporal fineness. The two do not vary together, and the Lambda Coefficient quantifies temporal precision only. Calibration in this area is assisted by instruments including the Resonance Tuning Fork, the Ambiguous Calipers, the Non-Invasive Calipers, and the Torque Calipers, each of which contributes a partial reading; the Resin-Spreader, Pattern Theta is used to fix such readings in place and is not itself a measuring device.

An ordinance specifying a dismantling to take place "shortly after the sounding of the bell on the day appointed" was measured at Lambda 0.211 and subsequently amended to "the third bell after noon on the fourteenth of the month named." The dismantling has not occurred. The amended ordinance remains open.


See also: Temporal Specificity, Temporal Regulation Clause 14-δ, Pedantic Gradient, Duralumin.

See also

Referenced by

Readers also asked

Vault of Redundant Precision: where is it?

The Vault's primary function is the containment of instruments that, while mechanically flawless, measure quantities or phenomena for which no further measurement is authorized, or whose granularity exceeds the maximum p…

Vault of Redundant Precision
Cataloguing Precision: how is it conducted?

Cataloguing Precision is the administrative principle and operational doctrine governing the accuracy, granularity, and permissible margins of error in the description and classification of holdings within the Tower. It …

Cataloguing Precision
Torque Calipers: what is it for?

Torque Calipers are precision instruments employed within the the Tower to measure the rotational strain, or torque, generated by contradictory cataloguing imperatives across a given floor or holding. Developed following…

Torque Calipers
Master Calibrators: who are they?

The Master Calibrators constitute the senior-most echelon of precision technicians within the Guild of Surveyors and Calibrators, vested with the executive authority to declare a Stairwell Calibration complete and bindin…

Master Calibrators

Passages cited from this record

Readers who consulted this also failed to find

Assistance

A Librarian is with you.

MS 9679.39
MS 8532.92
MS 1913.80

The Librarian considers the matter closed.

Typical response time: one Concordance. If your enquiry concerns a holding, consult the finding aid.