Moss Caliper
MS 9392.91 · Objects and instruments
Definition and Classification
The Moss Caliper is a metrological instrument of the second grade, used to measure the growth, compaction, and displacement of moss masses on the interior surfaces of the Tower. It is distinct from the several instruments of the Caliper Masters proper in that it was not devised to measure time, opacity, or the thickness of conceptual boundaries, but the slow lateral advance of living material across stone. It is, by common consent of the Office of Surface Registry, the only certified caliper whose readings degrade if the instrument is cleaned.
The Moss Caliper is not to be confused with the Moss Agglomerates it describes, nor with the Caliper of Dimensional Constancy, against which its readings are nonetheless certified. The relationship between the two instruments is set out under Certification below.
Construction
A standard Moss Caliper consists of a fixed jaw of unglazed clay, a sliding jaw faced with a pad of compressed Mourning Moss, and a brass rule graduated in tenths of a span — the span being the distance, fixed at 14.2 centimetres by Concordance 61 on Weights and Interior Measures, between the closed jaws when the pad is new. The sliding jaw is deliberately left unpolished. Early models were finished to the standard of the Tri-Vector Caliper and were found to shed moss from their faces after as little as nine days, rendering subsequent readings incomparable with earlier ones.
The instrument is carried in a felt sleeve, and the sleeve is not to be laundered. This ruling, recorded in the maintenance schedule of the Seventh Surface Ward, has never been rescinded, and wardens of long service are identifiable by the condition of their sleeves.
Method of Use
The warden lays the fixed jaw against the stone at the margin of the moss mass and advances the sliding jaw until the pad makes contact. Contact is judged by the cessation of a faint tacking sound rather than by sight, since the pad is opaque and the margin of a moss mass is not always distinguishable from the stone beneath it. The reading is taken immediately, and the jaw is withdrawn by no more than the thickness of the pad before the instrument is moved to the next station.
Stations are marked at intervals of one span, in chalk, by the same warden who will read them. A reading taken at the station of another warden is valid only if that warden's chalk is still legible; where it is not, the station is struck and re-marked, and the earlier series is closed.
The Displacement Question
The Moss Caliper is conventionally described as a measuring instrument, but for more than two centuries its principal use has been to establish whether a given mass of moss has displaced a previously measured mass, or merely succeeded it. The distinction is doctrinal rather than physical, and it is the subject of a standing disagreement between the Office of Surface Registry and the Commission on Living Fabric.
The Registry holds that displacement occurs when the margin of a mass advances by at least three-tenths of a span between readings, and that any lesser advance is to be recorded as succession — the old mass having died, the new having grown in its place. The Commission holds that displacement cannot be established by measurement at all, since the instrument measures the face of the moss and not its intention, and that all readings are therefore to be entered under succession until the question is settled. The dispute is old enough that both offices maintain parallel registers, and wardens are required to enter each reading twice.
"Where the face of a mass is found to have advanced, the advance shall be recorded as displacement in the register of the Office, and as succession in the register of the Commission, and neither entry shall be preferred."
— Concordance 44, Annex 9, clause (iii)
A third position, advanced by the warden Ilse Marrow in a note of 986, was that the distinction had no bearing on the moss and served only to keep two offices in ink. Marrow's note was neither adopted nor suppressed; it remains in the Registry's marginalia and is cited, against both offices, roughly once a decade.
Incidents and Revisions
The instrument was substantially revised following the winter of 914 on the Eleventh Surface Ward, when a warden attempted to survey a mass of Creeping Phosphor-Moss with an unmodified caliper and reported a growth rate of eleven spans in a night. The figure could not be reconciled with the moss's known advance and was eventually attributed to the instrument's jaws having been seized by the moss itself, which had entered the sleeve and grown around the fixed jaw. The warden's reading was struck from the register. The episode is the origin of the felt sleeve and of the rule that a Moss Caliper is never to be left in contact with a moss mass for longer than the reading requires.
Later revisions were administrative. Concordance 88 fixed the pad material, Concordance 103 forbade the use of the instrument on moss-growth spires above the fourth course, and a further amendment, number not clearly legible in the surviving recension, established that a Moss Caliper may be used to survey PC Moss only with the written permission of the Commission on Living Fabric. Permission is granted by post. The average interval between request and reply is given in the Registry's annual return as four months and eleven days.
Certification and Known Limits
All Moss Caliper readings are certified against the Caliper of Dimensional Constancy, which by the standing arrangement of the Caliper Masters must itself be recertified annually by a Caliper Master. The certification of a Moss Caliper lapses if the pad is replaced, if the sleeve is cleaned, or if the instrument is carried above the ward on which it was registered without a transit note. Instruments in lapse are retained but not read, and are stored face-down.
Recent survey work has also employed the Theta Caliper and its derivatives alongside the Moss Caliper where opacity of the moss canopy prevents a direct reading. The two instruments do not agree, and the difference, which runs to as much as two-tenths of a span on dense masses, is recorded as the Moss Reading Variance and is currently the subject of a revised annex to Concordance 44. The annex has been in draft since 1041. It is expected to be adopted.
See also
-
MS 6571.20
Compaction of Floor 872
The Compaction of Floor 872 is the standing condition of Floor 872, a floor lying between Floor 871 and Floor 873 whose vertical c…
-
MS 1796.94
Standard Metrological Protocols
Standard Metrological Protocols (SMP) refers to the governing codex of measurement practices, instrument certification, and disput…
-
MS 1307.90
Certificate of Metrological Aberration (CMA)
The Certificate of Metrological Aberration (abbreviated CMA, and never spelled out in running correspondence, where the initialism…
-
MS 9975.21
Metrological Accord
The Metrological Accord is the collective designation for four Concordance instruments — Concordance 44, Concordance 44-A, Concord…
-
MS 5423.26
Bureau of Metrological Calibration
The Bureau of Metrological Calibration is the Tower office charged with maintaining, auditing, and periodically correcting the wor…
-
MS 4963.26
Ordinatum of Standard Measures
The Ordinatum of Standard Measures is a codifying instrument of the Librarians, held in the Scriptorium of Instruments and numbere…
Referenced by
- MS 2219.45 Custodian-Gardener Arlo
Readers also asked
Concordance 44: what does it set out?
Concordance 44, formally Concordance Regarding the Deductive Non-Correlation of Hermetic Sequences, is a foundational yet contentious document governing the procedural isolation of unrelated archival phenomena. It establ…
Concordance 44Theta Caliper: what is it for?
The Theta Caliper is a multi-function metrological instrument, certified under the Materialist Chapter for use in dimensional, temporal, and conceptual assessment. Its operation is authorized by Concordance Theta and cal…
Theta CaliperPC Moss: what is it for?
PC Moss is the collective designation for a family of bryophytic growths cultivated in the lower Moss-Growth Spires for the express purpose of recording, storing, and — under controlled conditions — reproducing administr…
PC MossMoss-Growth Spires: what is it for?
Moss-Growth Spires are permanent, designated architectural features within the Tower, classified as Foundational Spires and defined by their role as primary cultivation sites for lumen-moss and associated symbiotic organ…
Moss-Growth SpiresPassages cited from this record
-
Where the face of a mass is found to have advanced, the advance shall be recorded as displacement in the register of the Office, and as succession in the register of the Commission, and neither entry shall be preferred.
Concordance 44, Annex 9, clause (iii)
Readers who consulted this also failed to find
- MS 3875.52 Ilse Marrow
- MS 1216.08 Commission on Living Fabric
- MS 7713.70 Eleventh Surface Ward
- MS 4158.41 Moss Reading Variance
Because you consulted