Handler Certification
MS 3431.37 · Practices and doctrines
Definition and Scope
Handler Certification is the credential authorizing a named individual to hold, carry, restrain, or otherwise accompany a catalogued object that cannot be left unattended within the Tower's floors. It is distinct from Certification in general and is not a species of Standard Certification, a distinction that has cost the Certification of Non-Interference sub-bureau a great deal of correspondence since the change of the millennium. The object, not the person, is certified; the handler is certified only in relation to that object, and only for the duration of carriage. A Handler Certification issued for a glass case on one floor is void for any other glass case, and void for the same glass case on a different floor.
The office that issues the registration is the Office of Bearers and Carriage, known internally as Bearers, which has occupied an unnumbered mezzanine above Floor 1,114 since the reorganisation following the winter of the Loose Materials Incident. Bearers does not report to a Librarian; it reports to the office of the Keeper of the Floor Inventory, which in turn reports to no one who has been found.
Origins and the Carriage Warrant
Handler Certification developed from the older instrument of the Carriage Warrant, a temporary permission granted by a floor's presiding Librarian to move a single object along a single corridor. The Warrants were not renewable and not transferable, and the earliest surviving example — Warrant 4,171, issued on Floor 219 for the transport of a copper ledger to a reading recess eleven metres away — specifies the return of the ledger "by the same hand, before the recess closes." It does not specify what happens if the recess is already closed, which was the difficulty on the day in question.
The Warrants proved inadequate to objects that required continual handling rather than transport, and the Certification of Non-Interference's administration began to complain of Warrants being used as de facto authorizations to keep things. In the forty-fourth recension, the practice of Handler Certification was given its present form: the object is registered to a handler, the handler's hand is recorded, and the certification lapses on the handler's releasing the object, losing the hand, or being reassigned.
The Three Registers
Handler Certifications are entered in three registers, of unequal authority. The Primary Register records the object and its dimensions. The Secondary Register records the handler and their mark. The Tertiary Register records the corridors in which carriage is permitted, and is not consulted by anyone at Bearers except in disputes, when it is consulted exclusively.
A Handler Certification takes effect only when the same entry appears in all three registers in the same hand. The clerks of the Secondary Register write in a script known as Bearers' Halfhand, a compressed form in which the final stroke of each word is carried into the next; the Tertiary Register is kept in full letters by ordinance. As a result no handler has ever completed a carriage on the first attempt, and the customary practice is to apply two days before the object is needed and to wait.
Dispute: The Question of Prior Standing
Whether Handler Certification is a form of Standard Certification is unresolved, and the two principal positions are each supported by a Concordance. Third Concordance, Annex 9, holds that any certification of a material object falls under the procedural authority of Annex C, and that Handler Certification is therefore a certification of the material and must be closed by a Certification of Non-Interference 88.7 when the material changes hands. The Eleventh Concordance, in a clause added later and numbered 4, holds the contrary: that a Handler Certification attaches to the handler, not the material, and that no Certification of Non-Interference may be issued against a living hand.
"A material that is certified is certified wherever it goes. A hand that is certified is certified only where it is."
— Eleventh Concordance, clause 4
The conflict surfaced in the matter of the Reading Room bridge, when a certified handler attempted to carry an object across a gap that the Tertiary Register did not recognise as a corridor. Bearers held that the certification was continuous, since the hand had not released the object. The sub-bureau held that the material had left its registered location and demanded a Certification Claim, which the handler had not filed, not having been told that a bridge was a location. The objection was withdrawn without explanation eleven days later, and the bridge was entered in the Tertiary Register as a corridor, though it is not one.
Reciprocal Requirements
Handler Certification depends on other certifications and is depended upon in turn. An applicant must present a Stability Certification, which requires Recursive Stability to have been established for the object in question; objects not yet stable cannot be carried, and are marked on the inventory as "to be left." A handler who will be required to strike, drop, or surrender the object in the course of carriage must also hold Certification in Abrupt Sonic Trauma Preparedness, which cannot be applied for without a valid Stability Certification, and which several handlers have discovered they needed only after dropping something.
Where the object is held in a vault between carriages, the certification is treated as suspended, and the vault must be certified under the Conditional Certification procedure. The Conditional Authority Vaults at Floor 88 and Floor 441 are the only vaults currently so certified, and the waiting list for a third has not advanced since it was opened.
Maintenance Notes
Bearers' mezzanine admits no applicants between the hours of 11 and 2, as the office cat is walked then. Applications left in the brass tray are stamped in the order they are weighed, not the order they arrive. A handler whose mark has been altered by injury must be re-registered before the mark is dry.
See also
-
MS 2879.98
Librarian-Taxonomist, Provisional Grade
Librarian-Taxonomist, Provisional Grade denotes a conditional certification authorizing an individual to read, handle, and classif…
-
MS 2668.55
Measurer-Scribe
The title Measurer-Scribe denotes a formal certification granted by the Guild of Exactitude and recognized by The Librarians, auth…
-
MS 2491.35
Certified Acoustic Nullifier (CAN)
Certified Acoustic Nullifier (CAN) is a professional certification tier issued by the Office of Acoustic Integrity, authorizing an…
-
MS 1474.86
Senior Verifier
Senior Verifier is a formal rank within the Tower's bureaucracy of measurement and certification, denoting an individual with auth…
-
MS 4353.57
Provisional Taciturnity License
The Provisional Taciturnity License is the entry-level credential of Silence Certification, issued under the authority of the Conc…
-
MS 5865.33
Provisional Taciturnity License (PTL)
The Provisional Taciturnity License (PTL) is the entry-level credential of Silence Certification, issued under the authority of th…
Referenced by
- MS 9146.40 Non-Interpretive Handling
- MS 1286.96 Left-Handed Screwthread
Readers also asked
Certification of Non-Interference: how is it conducted?
Certification of Non-Interference is the formal procedure by which the Librarians formally acknowledge that a discordant or conceptually unstable phenomenon has achieved a state of permanent, non-contaminating isolation.…
Certification of Non-InterferenceCertification in Abrupt Sonic Trauma Preparedness: how is it conducted?
Certification in Abrupt Sonic Trauma Preparedness (commonly abbreviated to C.A.S.T.P. and pronounced "castep") is a professional designation administered by the Bureau of Cartographic Integrity for personnel authorized t…
Certification in Abrupt Sonic Trauma PreparednessConditional Certification: how is it conducted?
The Conditional Certification is the ordinary instrument by which the Vault of Conditional Authority permits a person, office, or stairwell to come into contact with a holding that is not yet settled enough to be touched…
Conditional CertificationStability Certification: how is it conducted?
Stability Certification is the formal process by which any newly catalogued subject, object, spatial configuration, or conceptual holding within The Tower is assessed and confirmed not to threaten the ontological integri…
Stability CertificationPassages cited from this record
-
A material that is certified is certified wherever it goes. A hand that is certified is certified only where it is.
Eleventh Concordance, clause 4
Readers who consulted this also failed to find
- MS 6466.03 Office of Bearers and Carriage
- MS 8048.92 Carriage Warrant
- MS 4258.71 Conditional Authority Vaults
- MS 2550.96 Bearers' Halfhand
Because you consulted