Cross-Referential Integrity Scan
MS 9038.03 · Practices and doctrines
Definition and scope
A Cross-Referential Integrity Scan is the periodic instrumental examination of referential linkages between holdings on differing floors, conducted to determine whether the linkage in question continues to bear the weight placed upon it by the Master Cross-Reference Ledger. The Scan is distinguished from the Cross-Reference Audit by duration, instrument, and by the presence of a sealed verdict; from the Referential Integrity Scans of Ordinance 745-Delta by its cross-floor mandate; and from the Conflict Scan by its indifference to contradiction, which the Scan records but does not resolve.
The Scan was formalised under the Third Concordance, which charges it with assessing "the ontological integrity of referential linkages" (Third Concordance, Clause 12). In practice this means a team of examiners travels the corridor between two floors with a calibrated resonance rod, a copy of the relevant Ledger column, and a sealed tube of vermilion wax, and notes whether the rod hums, warms, or remains inert. The findings are recorded in triplicate: one copy to the Bureau of Referential Integrity, one to the holding's floor office, and one to the examiners' own annexe, where it is filed by the year of the Scan rather than the year of the linkage.
Instruments
Three instruments are in standard use. The resonance rod, a length of ash fitted with a brass collar and calibrated against Floor 6,118's reference lattice, detects ambient Cross-Referential Resonance but cannot distinguish a healthy linkage from a sick one; it reports only that something is present. The pressure bellows, deployed when a linkage is suspected of Cross-Referential Webbing, measures the tensile pull between two catalogue entries and is accurate to within one-eighth of a dyne, though only when the operator's hand is dry. The dry plate, borrowed from the scriptorium on Floor 2,904, produces a permanent impression of the linkage's "shadow" — a technique the Bureau has never fully endorsed but has also never prohibited.
Procedure
A Scan proceeds in three passes. The first pass establishes that both endpoints of the linkage exist and are shelved where the Ledger says they are. The second pass tests whether citing either endpoint still resolves to the other; examiners do this aloud, in the presence of a floor witness, and note any instance in which the citation produces a neighbouring holding instead. The third pass is silent and lasts one hour, during which the rod is laid across the corridor threshold and left alone.
Where the Scan identifies a low-grade Cross-Referential Resonance, the Bureau ordinarily schedules Referential Fumigation within the following quarter. Where it identifies Referential Sprawl, the matter is referred for Cross-Referential Anchoring and the Scan is marked "deferred" — a status which, as of the 88th recension of the Ledger, accounts for a little over eleven per cent of all Scans initiated.
Verdicts are sealed in vermilion wax and may not be opened by any party other than the Bureau for a period of forty days, during which the linkage is considered neither sound nor unsound. Several floor offices have observed that this period is convenient for all parties except the holding under examination.
Disputed classifications
Whether the Scan is a species of Cross-Reference Review or an independent procedure remains contested. The Bureau holds that the Review maps the "referential footprint" of a proposed action, whereas the Scan examines an existing linkage, and that the two therefore share no jurisdiction. The floor office of 14,330 has repeatedly objected that both procedures are performed by the same examiners with the same rod, and that the distinction is one of paperwork rather than practice. This objection was upheld once, in the winter of the Long Recension, and then quietly superseded by an annex the Bureau has never produced on request.
A second dispute concerns scope. Some examiners maintain that a Scan tests only the linkage and says nothing about the holdings it joins; others hold that a linkage cannot be sound if either endpoint has drifted, and that the Scan therefore implicitly certifies both. The latter reading would considerably enlarge the Bureau's authority, and has accordingly attracted more supporters each year.
Frequency and exemptions
Scans are scheduled at intervals of nine years for holdings on floors below 10,000, and at intervals of five years above, on the grounds that upper-floor linkages are younger and less settled. Holdings catalogued before the founding recension are exempt, as are all holdings on Floor 0, on the practical grounds that neither can be located with sufficient confidence to scan them.
Visiting examiners are reminded that the corridor between floors must be left unobstructed during the silent pass, that no holding may be reshelved while a dry plate is exposed, and that the resonance rod is not to be used to stir anything.
See also
See also
-
MS 9735.72
Referential Integrity Audit
The Referential Integrity Audit is the standing examination by which the Tower establishes whether a citation, once made, continue…
-
MS 4868.70
Referential Screening
Referential Screening is the generic designation for any examination conducted to establish whether a catalogue entry, artefact, o…
-
MS 7185.06
Referential Disengagement
Referential Disengagement is the formal separation of a catalogued subject from the referential apparatus that sustains it, conduc…
-
MS 9913.99
Harmonic Integrity Review
A Harmonic Integrity Review is the formal examination of a floor, installation, or declared object for conformance with the Harmon…
-
MS 7737.53
Contradiction Protocol Scan
Contradiction Protocol Scan is the periodic procedural examination conducted under the Contradiction Protocol to determine whether…
-
MS 5568.58
Referential Slippage
Referential Slippage is the registered displacement of a catalogued subject from its assigned referent without formal notice of re…
Referenced by
- MS 8771.85 Documentary Review
- MS 7737.53 Contradiction Protocol Scan
- MS 1352.03 Acoustic Purity Scan
- MS 3202.26 Bureau of Referential Integrity Body
- MS 5197.87 Cross-Examination
- MS 9735.72 Referential Integrity Audit
Readers also asked
Master Cross-Reference Ledger: what does it set out?
The Master Cross-Reference Ledger is the central, authoritative registry of all established and sanctioned cross-references within the Tower. Maintained by the Bureau of Referential Integrity on Floor 22,001, the Ledger …
Master Cross-Reference LedgerCross-Reference Audit: how is it conducted?
The Cross-Reference Audit is a formal investigative procedure mandated by the Third Concordance to assess and verify the ontological integrity of referential linkages within the Tower. Unlike a Cross-Reference Review, wh…
Cross-Reference AuditCross-Referential Webbing: how is it conducted?
Cross-Referential Webbing is the spontaneous accumulation of incidental cross-links among holdings that were never formally entered into relation under Cross-Referential Anchoring, resulting in a diffuse lattice of assoc…
Cross-Referential WebbingReferential Integrity Scans: how is it conducted?
Referential Integrity Scans are the mandatory cross-floor examinations conducted to confirm that a holding still resolves to that which it cites, and that that which cites it still resolves in turn. They are the operatio…
Referential Integrity ScansReaders who consulted this also failed to find
- MS 9049.04 Cross-Referential Resonance
Because you consulted