Conceptual Vector
MS 0465.52 · Practices and doctrines
Definition and standing
A Conceptual Vector is the unit of directional claim recognised by the Librarians for the purposes of cataloguing motion, derivation, and intent within the Tower. It is defined as a quantity possessing magnitude, phase, and conceptual valence, in accordance with the Vect Resonance Model, and is expressed in the record as a declared line of ascent, descent, or lateral bearing drawn from the centroid of the floor under assessment. Vectors are not physical; they are administrative. A Conceptual Vector exists once it has been recorded, and it continues to exist until superseded by a later recording or struck from the register by the Concordance in force.
The standing of a Conceptual Vector was settled, in broad terms, by the Instrument of Uniform Measure of 3061, which mandated one stable metric per conceptual vector across all floors. The Instrument's authors intended the ruling to end the practice of rescaling a vector mid-review in order to bring a marginal result within tolerance. The practice did not end; it moved to the annexes.
Components
Every Conceptual Vector comprises three components, each maintained by a separate office and each subject to its own schedule of calibration.
- Magnitude, recorded as a depth ledger entry, measures the vector's length understood as conceptual derivation from the centroid.
- Phase, maintained by the Vector Clerks against the calibration of the Tri-Vector Caliper, governs when the vector is considered to be in effect.
- Conceptual valence, the least stable component, records whether the vector draws toward, away from, or across its object.
Disputes concerning valence are the more common. A vector whose magnitude is undisputed and whose phase is current may nonetheless be held in review for years on the question of which way it leans.
Relation to assessment vectors
The three recognised assessment vectors — Vector Alpha, Vector Beta, and Vector Gamma — are Conceptual Vectors to which procedural duties have been attached. Vector Alpha is the initial assessment vector and must commence at the Aperture Alpha; its results, if inconclusive, may issue in a Vector Gamma designation. Vector Beta operates as the referred assessment and follows a declaration. All three are quantified by the Tri-Vector Caliper for positional variance, and their integrity as assessment instruments is the particular responsibility of the Vector Clerks.
A Conceptual Vector that has been formally entered in the register under Catalogue Vector 88-Alpha is a Declared Vector and may be cited in proceedings. An undeclared vector may be measured, but its measurements carry evidentiary weight only if some floor's clerk elects to sign them.
Calibration and the uniform metric
Calibration follows Growth Vector Calibration, administered under Catalogue Vector 88-Alpha. Growth Vector Calibration establishes the permissible drift for each component over a standard season and specifies the instrument of correction. The Instrument of Uniform Measure of 3061 requires that the metric applied to a given vector remain constant for the duration of its assessment; this clause is frequently cited and more frequently contested, since two vectors nominally sharing a metric are commonly found, on audit, to have been measured against different centroids.
The Liaison for Inter-Floor Topological Accord has read the Instrument as also settling the formal status of Topological Velocity, holding that a quantity which requires a second metric to express cannot be a vector at all. The Vector Clerks do not accept this reading and continue to record Tv in the standard ledgers. The matter was referred to the Concordance and returned unresolved on three separate occasions.
Complications
Conceptual Seepage — the drift of a vector's valence onto an adjacent floor's records — is the most common complication and is treated as a maintenance matter rather than an incident. Where seepage is detected, the affected vectors are re-measured and the floor's ledger annotated; no floor has ever been required to identify the source of the seepage, and no floor has offered one.
The second complication is Isolation of Epistemic Vector, which arises when a vector's object is itself a vector. Such recursion is permitted but requires the outer vector to be held at fixed magnitude for the duration of the review. In practice this is achieved by suspending the review, which is why several floors carry vectors that have been under assessment since before the Instrument of Uniform Measure of 3061 was drafted.
Visitors to any floor holding active Conceptual Vectors are asked not to stand between a vector's centroid and its declared bearing. This is posted at the stairwell.
Standing disagreements
Two readings of what a Conceptual Vector is remain in circulation. The first, held by the Vector Clerks and cited in Catalogue Vector 88-Alpha, treats a vector as an act of declaration: it exists because someone recorded it, and its properties are whatever the record says. The second, associated with the Liaison for Inter-Floor Topological Accord, treats a vector as a property of the floor, discovered rather than declared, with the record merely reporting what was already there.
The distinction matters in cases of contested priority. Under the first reading, the earliest signature settles a dispute over a shared bearing; under the second, the earliest measurement does. The two offices have each prevailed in cases before the Concordance without either reading being adopted as general, and the Tower's floor numbering offers no assistance in establishing which of the two came first.
"A vector is what the caliper says it is, and the caliper is what the ledger says it is, and the ledger is signed."
— Vector Clerks, marginal note on Catalogue Vector 88-Alpha
See also
-
MS 6647.35
Axis of Transit
Axis of Transit refers to any designated conceptual pathway, corridor, or vector within the Tower that has been formally recognize…
-
MS 2612.90
Manual of Substantive Derivation
The Manual of Substantive Derivation, in its present seventh revision, is the principal procedural code of the Realist School of C…
-
MS 9981.24
Harmonic Derivation
Harmonic Derivation is the formal process by which new administrative laws, procedural principles, and cataloguing directives are …
-
MS 5804.66
Manual of Substantive Derivation (7th Revision)
The Manual of Substantive Derivation (7th Revision) is the primary procedural text for the Realist school of cataloguing, delineat…
-
MS 0875.54
Metrology Spire
The Metrology Spire is the vertical holding devoted to the custody, verification, and periodic re-derivation of measurement standa…
-
MS 6922.59
Culinary Non-Matter
Culinary Non-Matter is the class of gastronomic entities recognised by the Tower as possessing neither mass nor location yet remai…
Referenced by
- MS 0777.54 Universal Propagation
- MS 4415.42 Dissolution Vector
- MS 4677.54 Precedents of Directional Intent
Readers also asked
Conceptual Seepage: how is it conducted?
Conceptual Seepage is the unauthorized migration of conceptual properties across designated archival boundaries, recognized as a primary vector for Anachronistic Seepage and Conceptual Contamination. Governed by fluctuat…
Conceptual SeepageConcordant Law: how is it conducted?
Concordant Law constitutes the primary, and some argue the sole, legitimate basis for formal governance within The Tower. It is distinguished from advisory precedent and temporal regulation by its derivation from, and am…
Concordant LawDeclared Vector: how is it conducted?
Declared Vector is a classification of intentional trajectory within the Tower, applied to any movement, administrative action, or social formation initiated with a stated purpose but not yet resolved into a terminal sta…
Declared VectorIsolation of Epistemic Vector: how is it conducted?
The Isolation of Epistemic Vector is the standing practice by which a variance identified during an Isolation Audit is separated from the vector that carried it, held at a designated Isolation Aperture, and prevented fro…
Isolation of Epistemic VectorPassages cited from this record
-
A vector is what the caliper says it is, and the caliper is what the ledger says it is, and the ledger is signed.
Vector Clerks, marginal note on Catalogue Vector 88-Alpha
Readers who consulted this also failed to find
- MS 8079.92 Instrument of Uniform Measure of 3061
- MS 9350.77 Vector Gamma
Because you consulted